John Deere 8000T 16" RH
Camso 5500 Series (High Roading)
Durabuilt part# 651-1604
OE Part# R222974
Diagonal Treadbar
8000T-8030T SERIES Compatible Models:
8100T, 8200T, 8300T, 8400T,
8110T, 8210T, 8310T, 8410T,
8120T, 8220T, 8320T, 8420T, 8520T,
8130T, 8230T, 8330T, 8430T, 8530T
Technical Specifications
|
AVAILABLE SIZES
|
|
16 in (406 mm)
18 in (457 mm)
25 in (635 mm)
30 in (762 mm)
|
|
TREADBAR HEIGHT
|
|
2.6 in (66 mm)
|
|
TREADBARS
|
|
48* or 96
|
|
TREADBAR TIP WIDTH
|
|
2.25 in (57 mm)
|
|
TREADBAR PITCH
|
|
6.9 in (175 mm)
|
|
GUIDE LUGS
|
|
48
|
|
GUIDE LUG LENGTH
|
|
4.7 in (119 mm)
|
|
CARCASS THICKNESS
|
|
1.61 in (41 mm)
|
Camso 5500 Series (High Roading)
Built for use in tough conditions, 5500
Series tracks are the right choice for
extensive road travel, operating on
sidehills and operating in abrasive
underfoot conditions. 5500 Series
tracks are designed to withstand
harsh applications such as landleveling
and cotton and sugar cane
residue.
The 5500 series offers more rubber
and more steel. This includes
increased tread height and width,
longer guide lugs, and a heavier
carcass, including additional rubber
layers or additional reinforcement
plies, or both, depending on the width.
Track Series vs. Application Matrix
|
APPLICATION/OPERATION DESCRIPTION
|
Camso 5500/6500 Series
|
| Soil Types |
Hard packed clay |
Not recommended |
Silt/loam |
Recommended |
Sticky and wet ground conditions |
Recommended |
Gumbo |
Recommended |
Rocky/Abrasive |
Recommended |
Gravel |
Recommended |
Sandy |
Recommended |
Snow/Ice |
OK to use |
| Field Conditions |
Minimal ground disturbance/Berming |
OK to use |
Extreme cold |
Not recommended |
In furrow applications |
Not recommended |
Short fields, applications requiring a lot of turning |
Recommended |
Flat land farming, slopes up to 10% |
Recommended |
Moderate side slope applications, slopes from 10 to 25% |
Recommended |
Severe side slope applications, slopes greater than 25% |
Recommended |
| Road Travel |
Small amount of roading, most field and travel distances within 5 mile radius |
Recommended |
Moderate amount of roading, most field and travel distances between 5 and 10 mile radius |
Recommended |
High amount of roading, typically travel in excess of 10 miles |
Recommended |
| Crop Types |
Wheat/Cereal grains |
Recommended |
Corn/Sorghum |
Recommended |
Soybeans |
Recommended |
Alfalfa/Grasses/Switchgrass |
Recommended |
Cotton |
OK to use |
Sunflowers |
OK to use |
Rice |
Recommended |
Sugarcane |
OK to use |
Sugar beets |
Recommended |
Vegetables |
OK to use |
| Applications |
Primary tillage (deep ripping, chisel plow, etc |
Recommended |
Secondary tillage (field cultivator, disk, roller, etc |
Recommended |
Fully mounted roll over plow |
Recommended |
Row crop planter |
Recommended |
Air seeder |
Recommended |
Manure tank |
OK to use |
Grain cart |
Recommended |
Tile plow |
Recommended |
Spraying |
Recommended |
Hay baling |
Recommended |
Stalk chopper/Brush hog |
OK to use |
Vegetable bedder |
Not recommended |
Front Blade — Silage |
Recommended |
Forage harvestor |
Recommended |
Snow grooming |
Recommended |
Agricultural scraper |
OK to use |
Commercial scraper |
Not recommended |
Forestry |
Not recommended |
Non-agricultural applications |
Not recommended |
