Kile® Clear View® Caps assist you by giving operators the ability to view and maintain proper oil levels of the idler and roller hubs. Clarity of oil, as well as sufficient oil, can help prevent the replacement and downtime of your equipment due to idler and roller repair.
The benefits of Kile® Clear View® Caps are:
- Ease of view of oil levels of idler & roller wheel hubs
- View clarity of oil
- Scratch resistant
- UV protected plastic
- High impact plastic protects against breakage
- Resistant to weather conditions of extreme heat or cold
- View inside and outside idlers and rollers with ease
- 5 year pro-rated warranty
Installation instructions:
Remove OEM cap retaining the washers, discard old bolts.
Allow oil to completely drain.
Remove any old gasket material from face of roller and idler hubs.
Using the enclosed replacement bolts & your OEM washers, place the Kile® Clear View® Caps, with gaskets, to the hub
Tighten bolts to 35-40 inch pounds.
Replace oil to manufacture specifications.
Tighten plug with plug wrench. Use only soap and water to clean caps, no solvents (solvents can cause clouding and premature failure of caps. Solvent use will void warranty)(cite)
