CaseIh STX/RT Series
Kile® Clear View® Caps
Model: K CVC STX, Steiger, Row Track
Kile Clear View Cap Kit Includes:
- 24 Roller Caps
- 16 Idler Caps
- 40 Plug
- 40 Plug O rings (installed)
- 1 Plug Wrench
- 16 Idler O rings
- 24 Roller O rings (s/n 107428 & above)
- 24 Roller O rings (s/n 107427 & below)
- Installation Instructions
STX/RT Compatible Models:
STX®* 375, 425, 440,450, 500
Quadtrac®* 380, 430, 480, 530; 385, 435, 485, 535; 400, 450, 500, 550,600; 470, 540,580, 620
RowtracTM* 350, 400, 450, 500; 370, 420, 470, 500
Kile® Clear View® Caps assist you by giving operators the ability to view and maintain proper oil levels of the idler and roller hubs. Clarity of oil, as well as sufficient oil, can help prevent the replacement and downtime of your equipment due to idler and roller repair.
The benefits of Kile® Clear View® Caps are:
- Ease of view of oil levels of idler & roller wheel hubs
- View clarity of oil
- Scratch resistant
- UV protected plastic
- High impact plastic protects against breakage
- Resistant to weather conditions of extreme heat or cold
- View inside and outside idlers and rollers with ease
- 5 year pro-rated warranty
Installation instructions:
Remove original Case IH cap and allow oil to completely drain.
Remove o-ring
Clean o-ring, housing & snap ring grove
Lightly oil o-ring before installing, install Kile® Clear ViewTM Cap and secure snap ring.
Replace lubricant in hub to manufacturer's specifications.
Install plug. Tighten with plug wrench.
Use only soap and water to clean caps, no solvents (solvents can cause clouding and premature failure of caps. Solvent use will void warranty) (cite)
